Cisco Catalyst 6807-XL User Manual

Figure 34: CAB-ACS-16= (Switzerland)
Related Topics
Removing and Installing Power Supplies, on page 50
Troubleshooting the Power Supply Module, on page 104
Power Supply Module, on page 5
Power Entry Module, on page 7
Chassis and Module Power and Heat Values
The following tables provide the power and heat dissipation data for the chassis and modules. Unless otherwise
noted, the information in the tables is measured under fully loaded conditions (transceivers installed). Typical
numbers are approximately 20 percent below the numbers listed in these tables.
Module power is the output from the power supply (internal to the system). The AC-input power is the
input from the outlet to the power supply. The percentage difference between the two values is the efficiency
of the power supply.
Note
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
74 OL-30656-01
Power Supply Specifications
Chassis and Module Power and Heat Values

Cisco Catalyst 6807-XL Specifications

General

Brand	Cisco
Model	Catalyst 6807-XL
Category	Switch
Language	English