longer be visible - if not, push the
Pinch the seat cushion fi xings to
remove them from their fasteners.
and lock it into place (the red
Replace the head restraints if
Ensure that the front and rear back-
rests are correctly locked in place.
The benchseat can either be totally
or partially folded (1/3-2/3).
To fold the rear left or right hand
seat, always start with the seat
cushion, never the backrest (risk of
Move the front seat(s) forward
Place the head restraints in
their lowest position or remove
Check that the seat belt is correctly
positioned by the side of the back-
Ensure that you fasten the side
seat belts into their buckles (the
central seat belt should not be fas-
Lift up the front of seat cush-
Be careful not to trap the seat belt and to correctly buckle
each belt, before each operation of moving the backrest. This
operation allows you to fold the backrests back up with their
seat belts and buckles ready for use by rear passengers.