After inserting a CD, with the printed
side facing upwards, the player will
start playing the CD automatically.
To change manually to CD source
(CD already inserted), press but-
until you obtain the source
the audio system will automatically
If the CD is not removed within 10
to 15 seconds of being ejected, it
will automatically be taken back
into the CD player, although it will
the beginning of the track currently
being played, press a second time
to go back to the start of the previ-
Press the buttons successively to
skip several tracks at a time.
You can also perform this opera-
When the track listing is displayed,
select the desired track using but-
You can also do this via the con-
To move swiftly through the CD,
press and keep pressed button
, respectively for fast forward
or rapid reverse with accelerated
You can also do this via the con-
Play resumes as normal when the
This menu allows activation/deac-
Playback of the fi rst 7 seconds
(approx.) of each track of the
Random playback of the CD
This can be accessed in two ways:
Either by pressing button
and proceeding as for Scan-
ning of RDS stations – the sub-
menu for Audio Preferences.
Or, provided you are in CD
source, by pressing on but-
. You can then access the
If one of these options is
active, it remains active for CD
For safety, do not use a CD player
if the cabin temperature is higher
than +60 °C or lower than -10° C.
If the temperature becomes too
high, an automatic safety device
will prevent the CD player from
working until an acceptable tem-
Store the CDs so that they are
kept free of dust. Avoid touch-
ing the disc surface as any
scratches may adversely affect
Do not attach any stickers to
Do not expose them to heat or
If the surface of the compact disc is
dirty, it can be wiped with a soft, clean
cloth. Always wipe from the centre of