The electronic parking brake com-
bines 2 operational modes:
Automatic application when the
engine is stopped and automatic
release on use of the accelerator
(automatic operation by default).
The MANUAL application/release
of the parking brake is possible
permanently by pulling/pushing
matically and progressively
when you press the accelerator
gear or reverse gear engaged)
press down fully on the clutch
pedal then press on the accelera-
With an automatic gearbox,
accelerate with the selector in
The extinction of the warning
instrument panel warning lamp.
The display of the message
“Parking brake released” on the
The lighting of the warning lamp
lamp on the instrument panel.
The display of the message
“Parking brake applied” on the
an operation sound will con-
fi rm to you the application/release
of your electronic parking brake.
To immobilise the vehicle
Immobilisation, engine off
With the vehicle stationary, the
applied when the engine is
cle, check that the park-
Never leave a child alone inside
the vehicle with the ignition
on, as they could release the
ing the engine, including when
in neutral), as you may release
E L E C T R I C PA R K I N G B R A K E