E L E C T R I C PA R K I N G B R A K E
ACTIVATION / DEACTIVATION OF
The automatic application when
the engine is switched off and the
automatic release when you press
the accelerator can be deacti-
vated. Activation / deactivation is
performed using the “Main Menu”
of the instrument panel screen.
To do so, select “Vehicle param-
eters / Comfort / Automatic parking
The deactivation of these
functions is confi rmed by
the lighting of this warn-
functions is confi rmed by
functions is confi rmed by
ing lamp on the instrument
With the automatic functions deac-
tivated, the application and release
of the parking brake are done man-
Manual application / release of the
parking brake is always possible.
With the ignition on or the engine
running, to release the parking
brake, press on the brake or accel-
The lighting of the warning lamp
lamp on the instrument panel.
The display of the message
“Parking brake applied” on the
When the driver’s door is opened,
a beep is heard and a message
displayed if the parking brake has
Immobilisation, engine running
With the engine running and the
vehicle stationary, in order to
immobilise the vehicle you need to
manually apply the parking brake
cle, check that the park-
The deactivation of the automatic
functions is recommended in
particularly cold conditions (ice)
and during towing (breakdown,
The extinction of the warning
instrument panel warning lamp.
The display of the message
“Parking brake released” on the
without pressing the brake pedal,
the parking brake will not be
released and the message “Foot
on brake necessary” will be dis-
played on the instrument panel
The lighting of the warning lamp
lamp on the instrument panel.
The display of the message
“Parking brake applied” on the
When the driver’s door is opened
with the engine running, a beep is
heard and a message displayed
if the parking brake has not been
To immobilise the vehicle
With the vehicle stationary, to
apply the parking brake whether
the engine is running or off,