D ES C R I P T I O N O F T H E C O N T R O LS
You can operate Navidrive using your
NaviDrive lets you access certain func-
tions by pronouncing the corresponding
Using pre-recorded words and expres-
Using a label recorded by the user.
To associate a voice label to a directory fi le,
Record a voice label for this fi le (e.g. “
press on the voice recognition button.
Activation of the function is confi rmed by
a beep and by the opening of a window on
The system is then listening:
If the word pronounced is understood by
the system, it is displayed in the window
If the word pronounced has not been
understood, the system displays and
You must then repeat the words.
To enhance the effi ciency of recogni-
tion of the labels in your directory fi les,
it is recommended to record them with
The voice commands function in a
logical sequence. A word voiced at
one level must be recognised before
another word at the next level can be
wheel) or on the voice recognition control
to deactivate the function.
Voice recognition deactivates auto-
following an action using voice commands
(emission of a double beep),
after a few seconds with no voice com-
To call a number in your telephone direc-
press on the voice recognition button.
Wait for the system to answer with a beep.
Wait for the system to answer with a beep.
Finally pronounce for example the label
After the double beep, the desired action is
Say the key words that correspond to the
action that you wish carried out.
”, you will see displayed all the com-
mands that are available at the moment
If you should lose your way in the different
levels of the voice command structure,
to the voice commands at the previous
However careful the user may be, the
pre-recorded words or expressions will
always be more easily recognised than
words recorded by the user.
WHAT IS A VOICE COMMAND ?
HOW TO ACTIVATE VOICE RECOGNITION ?
HOW TO DEACTIVATE VOICE RECOGNITION ?
To Next Page
Loading...
Need help?
General
