Remove the protective cap
Disengage the retaining spring.
Remove the bulb and replace it,
paying attention to the direction
Replace the retaining spring.
Replace the protective cap
Replace the cover and fi x it in
Remove the protective cap
Pull the bulb holder to remove
Replace the bulb and replace
Replace the protective cap
Replace the cover and fi x it in
For the maintenance of the front
headlamp unit and the changing of
headlamp unit and the changing of
headlamp unit and the changing of
Halogen bulbs must not be changed until they have been off for a few minutes (risk of serious
Do not touch the bulb directly with your fi ngers, use a lint-free cloth.
It is essential that only anti-U.V. type bulbs are used in order not to damage the headlamp.
C H A N G I N G B U L B S