F R E Q U E N T LY- A S K E D Q U E S T I O N S
There is a discrepancy in
sound quality between the
To achieve an optimum listening quality, the
audio adjustments (Volume, Bass, Treble,
Ambiance, Loudness) can be adapted to
each of the different sound sources, which
can produce audible shifts when you change
the source (radio, CD, CD changer etc.).
Check that the audio adjustments (Vol-
ume, Bass, Treble, Ambiance, Loud-
ness) are adapted to your preferences
for each of the sources being listened
The CD immediately ejects.
The CD is the wrong way up, is unplayable,
does not contain audio data or contains an
audio format that the radio cannot play back.
Check that you have inserted the CD
the right way up in the CD player.
Check the condition of the CD: the CD
cannot be played back if it is too dam-
Check the contents if it is a burnt CD:
refer to the advice given in the chapter
For reasons of poor quality, some
burnt CDs will not be played back by
The CD changer does not play back
The CD changer does not play back
The CD is scratched or of poor quality.
Insert only CDs of good quality and
keep them in good condition.
The pre-set stations do not
The waveband selected is not the correct
Press on the button BND to retrieve the
wave band (AM, FM1, FM2, FMAST)
where the stations have been memo-
The table below brings together the answers to the questions that are the most frequently asked.
To Next Page
Loading...
Need help?
General
