33NX501E/NZ501E
English
English
Owner’s Manual
12. iPod/iPhone OPERATIONS
iPod/iPhone can be connected by the special
connector cable (CCA-748) separately sold.
Note:
•Thissystemwillnotoperateormayoperateimproperly
with unsupported versions.
•FordetailedinformationontheplayableiPod/iPhone
models, see our home page: www.clarion.com
Notes on using Apple iPod/iPhone
• DonotconnectaniPod/iPhonetothisunitwitha
headphone connected to the iPod/ iPhone.
• AftertheiPod/iPhonehasbeenconnectedtothis
unit, the buttons of iPod buttons are disabled for
operation in the Music mode. In the Video mode, do
not operate the buttons of iPod.
• WhenintheiPodmode,aspecialiPod/iPhone
control screen is displayed different from the main
screens for other modes.
• WhenintheiPodmode,thescreenimageinput
from the AUX terminal is output to the rear monitor.
• Whennodataispresent,thetitledisplaywillremain
blank.
• TheiPod/iPhoneisusedwiththeequalizerfunction
turned OFF.
• SetthelanguagesettingofiPod/iPhonetoEnglish
before connecting your iPod/iPhone. Some
characters of the other languages may not be
displayed correctly in this system.
Precautions on battery consumption:
If the iPod/iPhone is connected to this unit when the
internal battery of iPod/iPhone has run down, this
function may not operate correctly. You must connect
the iPod/iPhone after charging the battery if it has run
down.
Selecting the iPod Audio mode
Connect your iPod/iPhone to the USB connector via
CCA-748 cable. The system will automatically detect
the connected device and the iPod Audio button will
be enabled for operation on the Main Menu screen.
The playback starts after a while, from where the iPod/
iPhone has been paused.
• WheniPod/iPhoneisalreadyconnected
Touch the [iPod Audio] button on the Main Menu
screen. The system changes to the iPod mode, and
starts playback from the previous position.
Press [MENU] button on Operational Panel to return
to the Main Menu.
Controlling the iPod/iPhone
iPod audio mode screen
1 2 5 6 7 8
101213
3
4
11
8
14
15
1. [ ] Settings Button
Displays the Options screen. You can specify play
modes and other settings from this screen.
2. [ ] Previous Track Button
3. [ ] Repeat Button
Use to repeat the selected track.
Press once to start a single track repeat. Press again
to activate a repeat all. To turn repeat off, press same
button again. Repeat symbols are displayed in the info
window in the upper left area of the screen.
[ ]:Allrepeat.
[ ]:1-Trackrepeat.
[ ]:Repeatoff.
4. [ ] Play/Pause Button
Use to control playback and pause.
(1). Touch the key during playback. Playback pauses.
(2). To resume playback touch the key again.
5. [ ] Shuffle Button
Use to switch the shuffle mode on or off. When
enabled, this function performs playback of tracks in
random order, regardless of the order in which they are
recorded.
[ ]:ShufeOff.
[ ]:SongShufe.
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
Need help?
General
