38 NX501E/NZ501E
English
Owner’s Manual
4. Touch your desired Device and press the [ ]
key to register for the Bluetooth audio player.
5.IfenteringthePassKeycodeispromptedonyour
Bluetoothaudioplayer,enterthePassKeycodeset
to this unit.
• YoucanchangethePasskeysettingofthisunit
from the BT Info screen.
• Youalsocanaddthefavoriteicontotheconnected
device. There are 10 favorite icons for selection.
When the pairing operation completes, the registered
Bluetooth audio player is set as the current device,
after selecting the favorite icon, the display return to
the device list screen. Press [ ] button, the display
will return to the Bluetooth audio mode screen.
Note:
•YoucannotregisterthesameBluetoothaudioplayer
whichisalreadyregistered.Ifyouwishtochangethe
Device key registered, once delete the corresponding
Bluetooth audio player from the previous Device key,
and then register it again to your desired Device key.
•TodeletetheBluetoothaudioplayerregistration
1. Touch the [ ] key to delete the device.
A confirmation screen is displayed.
2. Touch the [ ] key to confirm delete.
Selecting the Bluetooth audio player
To change the current Bluetooth audio player to the
other device which is already registered, perform the
following operation.
1. Touch the Device key to [ ] display the Device
Select screen.
2. Touch the currently connected device, then press
the [ ] key to disconnect the active device.
3. Touch the desired Device key you wish to use.
Press [ ] key to select it as your active device.
The corresponding cellular phone is set as current
telephone.
• Ifthepowerofthecellularphoneisnotturnedon,
turn it on.
• Thecellularphonemayprompttoacknowledgethe
BluetoothconnectionorasktoenterthePassKey
code of this unit.
Perform these operations according to the message
displayed.
4. Touch the [ ] key to return to the previous
screen.
Controlling the Bluetooth audio player
Note:
•Occasionally,dependingontheenvironment,playback
sounds may be fragmented, or switch noises may be
generated.
Playing a music
After the connection with a Bluetooth audio player is
established, the play mode is automatically engaged.
• Whenplaybackisnotstartedforsomedevices,
touch the [ ] key manually.
Pausing playback
1. Touch the [ ] key during playback.
Playback pauses.
2. To resume playback, touch the [ ] key. Playback
resumes.
Skipping a track (searching)
3. Press the [ ] or [ ] button during playback.
Tracks are skipped, as many as the times the button is
pressed, and playback starts.
Stopping playback
4. Press the [ ] button during playback.
Tracks are stopped, press the [ ] button to
playback the first Track.
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
Need help?
General
