ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
169
Group: Sensors Spec
Setpoint group Sensors Spec Related FW 2.5.0
Range [units] -1000 .. +1000 [-]
Default value 0 -
Step 1
Comm object 11919 Related applications
Description
Calibrate the constant to adjust the measured value of ID-Lite analog inputs. Physical dimension of
calibrating constant is corresponding to analog input.
Note: Calibration constants have to be adjusted when measured value is near the alarm level.
Calibr AI1
6 back to List of setpoints
Setpoint group Sensors Spec Related FW 2.5.0
Range [units] -1000 .. +1000 [-]
Default value 0 -
Step 1
Comm object 11920 Related applications
Description
Calibrate the constant to adjust the measured value of ID-Lite analog inputs. Physical dimension of
calibrating constant is corresponding to analog input.
Note: Calibration constants have to be adjusted when measured value is near the alarm level.
Calibr AI2
6 back to List of setpoints
Setpoint group Sensors Spec Related FW 2.5.0
Range [units] -1000 .. +1000 [-]
Default value 0 -
Step 1
Comm object 11921 Related applications
Description
Calibrate the constant to adjust the measured value of ID-Lite analog inputs. Physical dimension of
calibrating constant is corresponding to analog input.
Note: Calibration constants have to be adjusted when measured value is near the alarm level.
Calibr AI3
6 back to List of setpoints

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English