ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
44
For CAN data cables details see Technical data on page 87 – Communication interface.
CAN cable shielding is connected to ID-Lite COM terminal.
ID-Lite contains internal fix 120 Ω resistor and must be located on the CAN bus end.
It is possible to connect only one remote annunciator to ID-Lite controller.
Use button in LiteEdit Modify window to activate CAN interface.
5.5 Front panel elements

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English