ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
182
9.1.3 Values
What values are:
Values are displayed on the controller screen or are accessible via icon in the LiteEdit PC tool. See the table
with all visible values in LiteEdit.
Note: Some engine values (*) are visible only if the ECU unit is configured.
Groups Name Note
Load limit LoadLimitOut
Engine values
RPM
RPM-BI3
ECU State (*)
ECU FreqSelect (*)
SpeedReq Abs
SpeedReq Rel (*)
Engine Speed
Fuel Rate (*)
CoolantTemp (*)
Intake Temp (*)
Oil Press (*)
Boost Press (*)
Oil Temp (*)
ECU-AIN 8 (*)
ECU-AIN 9 (*)
FuelUsed (*)
DPF1 Soot Load (*)
DPF1 Ash Load (*)
If ECU is not configured, then is
displayed only RPM, RPM-BI3 and
SpeedReq Abs
Statistic
Run hrs
Num starts
NextServTime
E-Stop
ShutDown
DayCons
TripCons
Analog CU
Ubat
D+
OilPressure
Engine Temp
Fuel level
AIN4-AIN9
Analog inputs are shown depends
on if they are configured or not

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English