ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
43
5.3.1 Default analog output curves
5.4 Remote modules - CAN bus connection
5.4.1 Connection rules
CAN bus line must be connected in series, from one unit to the next (no star, no cable stubs, no branches) both
ends must be by the 120 Ω (internal or external) resistor terminated. Maximal CAN bus length is up to 200m.

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English