ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
7
• The SNMP protocol (port UDP/161) version 1,2 is not encrypted. Thus it is intended to be used only in closed
private network infrastructures.
• Avoid exposing the port UDP/161 to the public Internet.
1.4 Document history
Revision number SW version Date Author
12 2.5.0 3.2.2019 Lukáš Bečka
11 2.5.0 11.10.2019 Lukáš Bečka
10 2.3.0 4.10.2019 Lukáš Bečka
9 2.3.0 17.4.2019 Lukáš Bečka
8 2.3.0 28.3.2019 Lukáš Bečka
7 2.3.0 25.3.2019 Petr Weinfurt
6 2.3.0 13.3.2018 Petr Weinfurt
5 2.2.0 19.1.2016 Petr Weinfurt
4 2.1.0 9.11.2015 Zdeněk Rojka
3 1.9.0 17.12.2014 Jaroslav Juriga
2 1.8.0 13.5.2014 Jaroslav Juriga
1 1.7.0 5.5.2013 Jaroslav Juriga
Note: ComAp believes that all information provided herein is correct and reliable and reserves the right to
update at any time. ComAp does not assume any responsibility for its use unless otherwise expressly
undertaken.
1.5 Language support
ID-Lite controllers support different languages. In default setting of controller are accessible two languages
English, which isn’t possible remove and Chinese. In the controller is possible to substitute Chinese language
by next language via LiteEdit (see the table below). These languages are possible modify via Translator tool in
LiteEdit.
Following language code pages are supported:
Code page Language Windows code
0 West European languages Windows 1252
134 Chinese GB 2312
161 Greek Windows 1253
162 Turkish Windows 1254
177 Hebrew Windows 1255
204 Russian Windows 1251
238 East European languages Windows 1250
6 back to Document history

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English