ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
78
Faultcode Diagnostic code Faultcode Diagnostic code
0×6200 FanActuator 0×E200 OverheatProt
0×6400 WasteGateAct 0×E600 CoordEmergStop
0×6600 StarterActuatr
6.4 Tier 4 diagnostic codes
If the configured ECU supports Tier 4 standard, on the controller screen are displayed supplementary values
relative to the DPF status.
In ECU list-5.6 supported for John Deere, Cummins CM2250, CM850 and Deutz EMR4.
Table 6.1 Practical example of the screen
HEST Lamp
SPN 3698
Exhaust High Temperature.
Visible when SPN 3698 = 1
DPF Inhibit
SPN 3702
Visible when SPN 3702 = 1
DPF Lamp
SPN 3696
SPN 3697
Visible when CM1: SPN 3696 (Force switch) = 1
or
SPN 3697 (DPF Lamp Command) = 1.
Blinks – changes to inverse (1Hz) when 3697 =
100.
DPF Lamp
+ Warning
Active when 3697 = 1 and SPN 3701 = 4
Meaning of the pictograms

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English