DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
The Scheduling Mechanism has the following parameters.
Parameter Description
Strict
Denoting a Strict scheduling will set the highest queue to be emptied first while the
other queues will follow the weighted round-robin scheduling scheme.
Weight Fair
Use the weighted round-robin (WRR) algorithm to handle packets in an even
distribution in priority classes of service.
Click Apply to let your changes take effect.
CoS Output Scheduling
CoS can be customized by changing the output scheduling used for the hardware classes of service in the Switch. As with any
changes to CoS implementation, careful consideration should be given to how network traffic in lower priority classes of service
is affected. Changes in scheduling may result in unacceptable levels of packet loss or significant transmission delay. If you choose
to customize this setting, it is important to monitor network performance, especially during peak demand, as bottlenecks can
quickly develop if the CoS settings are not suitable. In the CoS folder, click CoS Output Scheduling, to view the window shown
below.
Figure 8- 6. CoS Output Scheduling window
Click Apply to implement changes made.
105
To Next Page
Loading...
Need help?
General