DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
SNMP Traps Settings
The following window is used to enable and disable trap settings for the SNMP function on the Switch. To view this window for
configuration, click Administration > SNMP Manager > SNMP Trap Settings:
Figure 6- 27. SNMP Trap Settings window
To enable or disable the Traps State and/or the Authenticate Traps State, use the corresponding pull-down menu to change and
click Apply.
SNMP User Table
This window displays all of the SNMP User's currently configured on the Switch.
In the SNMP Manager folder, located in the Administration folder, click on the SNMP User Table link. This will open the
SNMP User Table window, as shown below.
Figure 6- 28. SNMP User Table window
To delete an existing SNMP User Table entry, click the
below the Delete heading corresponding to the entry you wish to
delete.
To display the detailed entry for a given user, click on the View button under the Display heading. This will open the SNMP User
Table Display window, as shown below.
Figure 6- 29. SNMP User Table Display window
The following parameters are displayed:
Parameter Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
49
To Next Page
Loading...
Need help?
General