DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Multiple Image Services
To configure the files located on the Flash memory, use the following windows to guide you.
Firmware Information
This window is used to view boot up firmware images.
Figure 6- 21. Firmware Information window
Config Firmware Image
The following window is used to determine which of the two firmware images will be used as the default boot file. You can also
delete either of the two images.
Figure 6- 22. Config Firmware Image window
44
To Next Page
Loading...
Need help?
General