To Next Page

To Previous Page

BULBS REPLACEMENT

HEADLIGHT BULB

● Remove the front cover. ( 3-5 )

● Remove the headlight rubber cover.

● Push down on the socket and turn to the left.

● Replace with new bulb.

·Before replacing the bulb, be sure to check the

swtiches for loose connection of the connectors.

● Install in the reverse order of removal.

·Headlight bulbs become very hot while the headlight

is ON, and remain hot for a while after they are

turned OFF.

·Be sure to turn the ignition switch OFF and let the

bulb cool down before replacement.

·If you touch the bulb with your bare hands, clean it

with a cloth moistened with denatured alcohol to

prevent early bulb failure.

·Be sure to install the dust cover after replacing the

bulb.

FRONT WINKER BULB

● Remove the front cover. ( 3-5 )

● Remove the bulb from the socket, replace with new bulb.

● Install in the reverse order of removal.

16-5

LIGHTS/METER/SWITCHES

HEADLIGHT RUBBER COVER

HEADLIGHT BULB

WINKER RELAY

FRONT WINKER

DAELIM a.four User Manual

Questions and Answers: