Dahua NVR100 series User Manual

242
Figure 4-84
If you are connecting to network PTZ, the PTZ type shall be remote. See Figure 4-85.
Figure 4-85
4.4.2 PTZ Control
After completing all the setting please click save button. Right click mouse (click “Fn” Button in the
front panel or click “Fn” key in the remote control). The interface is shown as in Figure 4-86. Please
note you can only go to the PTZ control interface when you are in 1-window display mode.

Dahua NVR100 series Specifications

General

Brand	Dahua
Model	NVR100 series
Category	Network Hardware
Language	English