Dahua NVR100 series User Manual

294
Figure 4-143
4.7.6 People Counting (Optional)
System can calculate the entry/exit people amount in the specified zone. It can generate an alarm when
the amount has exceeded the threshold.
From main menu->Setting->Event->People counting, you can see an interface shown as in Figure 4-144.
 Enable: Check the box to enable people counting function.
 OSD overlay: Check the box here; you can view the people amount on the surveillance video.
 Rule setup: Click Set button, you can set people counting zone, name, and direction (entry/exit).
 Entry No.: It is to set people entry amount. System can generate an alarm once the amount has
exceeded the threshold.
 Exit No.: It is to set people exit amount. System can generate an alarm once the amount has
exceeded the threshold.
 Remaining No.: It is to set people staying amount in the zone. System can generate an alarm once
the amount has exceeded the threshold.
You can refer to the chapter 4.7.1.1 motion detection to set other parameters.
Click OK to complete the setup.

Dahua NVR100 series Specifications

General

Brand	Dahua
Model	NVR100 series
Category	Network Hardware
Language	English