Danfoss iC2 User Manual

Selection number Selection name Selection description
4 Motor Current Motor current in [A].
6 Motor power Motor power in either [kW] or [hp].
7 Motor voltage Motor voltage in [V].
12 Analog input AI33 Expressed as actual value.
13 Analog input AI34 Expressed as actual value.
19 Pulse input FI18 Expressed as actual value.
20 Alarm number Shows number of the alarm.
30 Counter A Number of counts.
31 Counter B Number of counts.
P 8.4.3.2 Comparator Operator
Select the operator to be used in the comparison. This is an array parameter containing comparator operators 0–5.
Default value: 0 Parameter type: Selection
Parameter
number:
1311 Unit: –
Data type: enum Access type: Read/Write
The following are the selections for the parameter.
Selection number Selection name Selection description
0 Less Than (<) Result of evaluation is True if variable selected in P 8.4.3.1
Comparator Operand is smaller than fixed value in P 8.4.3.3
Comparator Value. Result is False if variable selected in P 8.4.3.1
Comparator Operand is greater than fixed value in P 8.4.3.3
Comparator Value.
1 Approx. Equal (~) Result of evaluation is True if variable selected in P 8.4.3.1
Comparator Operand is approximately equal to fixed value in P
8.4.3.3 Comparator Value.
2 Greater Than (>) Inverse logic of selection 0.
P 8.4.3.3 Comparator Value
Enter the "trigger level" for the variable which is monitored by this comparator. This is an array parameter containing comparator values
0–5.
Default value: 0 Parameter type: Range (-9999000–9999000)
Parameter
number:
1312 Unit: –
Data type: int32 Access type: Read/Write
206 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters

Danfoss iC2 Specifications

General

Brand	Danfoss
Model	iC2
Category	Media Converter
Language	English