Table 12: Legend Table (continued)
Number Field Name Description
4 Selection para-
meters
To see all selections available for the parameter, click the value in the Value field.
5 Default The factory setting (default value) of the parameter.
6 Range of para-
meters
The parameter value can be modified based on the ranges defined (maximum and minimum val-
ues).
7 Unit When applicable, the user unit of the parameter is shown in the Unit field.
8 Number Parameter number (PUN) is the unique identifier of a parameter for modbus registers. See 6.1.6.2.8
Parameter Number (PNU).
9 Help Click the ? button to see description about the parameter. For more detailed descriptions, see 7.1
Reading the Parameter Table.
10 Favorite To add parameters to Favorites, click the button.
11 Edit and reset
columns
Use the 3 dots icon to select the required column types or reset all columns. The columns sequence
could be changed with click, hold, and drag.
3.3.5 PC Control to Operate the Drive using MyDrive® Insight
To operate the drive using PC control, click control panel button in MyDrive® Insight. Figure 26 shows the different screens to operate the
drive via MyDrive® Insight.
40 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters
To Next Page
Loading...
Need help?
General
