Application Guide | iC2-Micro Frequency Converters
9 Appendix
9.1 Parameter Lists
Group index Group name Parameter
index
Parameter name Parameter
number
Type
1 Grid
1.2 Grid Settings
1.2.1 Regional Settings 3 enum
1.2.2 Grid Type 6 enum
1.3 Grid Protection
1.3.1 Mains Imbalance Action 1412 enum
2 Power conversion & DC-link
2.1 Status
2.1.1 DC-Link Voltage 1630 uint32
2.1.2 Inverter Thermal 1635 uint8
2.1.3 Unit Nominal Current 1636 uint16
2.1.5 Output Current Limit % 1637 uint16
2.1.9 Heat sink Temperature 1634 int8
2.1.10 Real-time Switching Frequency 1866 int8
2.3 Protection
2.3.1 Overvoltage Controller Enable 217 enum
2.3.2 Overvoltage Controller Kp 219 uint16
2.3.6 Power Loss Action 1410 enum
2.3.7 Power Loss Controller Limit 1411 uint16
2.3.8 Kin. Back-up Trip Recovery Level 1415 uint32
2.3.9 Fast Mains Phase Loss Level 1417 uint16
2.3.10 Fast Mains Phase Loss Min Power 1418 uint16
2.3.13 Auto DC Braking 7 enum
2.3.14 Max Output Frequency 419 uint16
2.3.15 Action At Inverter Fault 1427 enum
2.3.16 Function at Inverter Overload 1461 enum
2.3.17 Adjustable Temperature Warning 442 uint8
2.4 Modulation
2.4.2 Min. Switching Frequency 1463 enum
2.4.3 Switching Frequency 1401 enum
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 275
To Next Page
Loading...
Need help?
General
