Group index Group name Parameter
index
Parameter name Parameter
number
Type
2.4.5 Over Modulation 1403 enum
2.5 DC-Link Control
2.5.1 Damping Gain Factor 1408 uint8
2.5.2 DC-Link Voltage Compensation 1451 enum
2.7 Output Current Limit
2.7.1 Output Current Limit % 418 uint16
2.7.2 Current Limit Kp 1430 uint16
2.7.3 Current Limit Ti 1431 uint16
2.7.4 Current Lim Ctrl, Filter Time 1432 uint16
2.7.5 Trip Delay at Current Limit 1424 uint8
3 Filters & Brake Chopper
3.1 Status
3.1.1 Brake Energy 1633 uint32
3.2 Brake Chopper
3.2.1 Enable Brake Chopper 215 enum
3.2.2 Brake Chopper Voltage Reduce 214 uint16
3.3 Brake Resistor
3.3.2 Brake Resistor Value 211 uint16
3.3.3 Brake Resistor Power Limit 212 uint32
4 Motor
4.1 Status
4.1.1 Motor Current 1614 uint16
4.1.2 Motor Voltage 1612 uint32
4.1.3 Motor Electrical Power 1610 uint32
4.1.4 Motor Power hp 1611 uint32
4.1.5 Motor Thermal Load 1618 uint8
4.1.6 Frequency 1613 uint32
4.1.7 Frequency % 1615 uint16
4.1.8 Motor Shaft Speed 1617 int32
4.1.10 Motor Torque 1616 int32
4.1.11 Motor Torque % 1622 int16
4.2 Motor Data
4.2.1 General Setting
276 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters
To Next Page
Loading...
Need help?
General
