Danfoss iC2 User Manual

Application Guide | iC2-Micro Frequency Converters
Group index Group name Parameter
index
Parameter name Parameter
number
Type
4.2.1.1 Motor Type 110 enum
4.2.1.2 Number of Poles 139 uint8
4.2.1.3 AMA Mode 129 enum
4.2.1.4 Motor Cable Length 142 uint8
4.2.1.5 Motor Cable Length Feet 143 uint16
4.2.2 Nameplate Data
4.2.2.1 Nominal Power 120 uint16
4.2.2.2 Nominal Voltage 122 uint16
4.2.2.3 Nominal Current 124 uint32
4.2.2.4 Nominal Frequency 123 uint16
4.2.2.5 Nominal Speed 125 uint16
4.2.3 Asyn. Induction Motor
4.2.3.1 Stator Resistance Rs 130 uint32
4.2.3.2 Rotor Resistance Rr 131 uint32
4.2.3.4 Stator Leakage Inductance Lls 133 uint32
4.2.3.6 Magnetizing Inductance Lm 135 uint32
4.2.3.7 Motor Cont. Rated Torque 126 uint32
4.2.4 Permanent Magnet Motor
4.2.4.1 Back EMF 140 uint16
4.2.4.3 d-axis Inductance Ld 137 int32
4.2.4.4 d-axis Inductance LdSat 144 int32
4.2.4.6 Ld Current Point 148 int16
4.2.4.7 q-axis Inductance Lq 138 int32
4.2.4.8 q-axis Inductance LqSat 145 int32
4.2.4.10 Lq Current Point 149 uint16
4.4 Motor Control
4.4.1 General Settings
4.4.1.2 AEO Minimum Magnetization 1441 uint8
4.4.1.3 Torque Characteristic 103 enum
4.4.1.4 Clockwise Direction 106 enum
4.4.1.5 Motor Control Bandwidth 108 enum
4.4.2 AC-Brake
4.4.2.1 Enable AC-Brake 210 enum
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 277

Danfoss iC2 Specifications

General

Brand	Danfoss
Model	iC2
Category	Media Converter
Language	English