Danfoss PVED-CLS User Manual

© Danfoss | August 2018 AQ00000211 | 15
ENGINEERING TOMORROW
Min.
Max.
Cut-off valve present P3072 U8 -
Cut-off Valve Present/Not Present
Valid Values: 0 (NOT PRESENT); 255 (PRESENT)
OEM 0 255 255 S
Valve type P3081 U8 -
Valve type on which the PVED-CLS is mounted
Valid Values: 0 (OSPE, EHi-E); 1 (EHPS); 2 (EHi-H)
OEM 0 2 0 S
OSP displacement P3084 U16 ccm
OSP displacement, number of cubic centimeters per revolution
Note: When the PVED-CLS is mounted on an EHPS this parameter
must be set equal to 0!
OEM 0
120
0
120 S
Cylinder stroke volume P3086 U16 ccm
Cylinder stroke volume.
Acceptable values: 100-10000.
Note: Writing values >10000 will force to use automatic adjusted
cylinder stroke volume-value on WAS calibration
OEM 100
655
35
500 S
Table 1
For further information on how to design steering-system and sensor sub-systems, please refer to the following:
• OSPE Steering valve Technical information
• SASA sensor Technical information
• PVED-CLS Safety Manual
• EHi Technical information
Important
The number of steering wheel turns Lock-to-lock is dependent on following:
• OSP displacement
• EH-spool and pilot flow
• Standby pressure (spring force)
• Cylinder volume

Danfoss PVED-CLS Specifications

General

Brand	Danfoss
Model	PVED-CLS
Category	Controller
Language	English