CD820 Instant Issuance System User’s Guide 13
Printer Controls
The front panel of the printer provides the controls for operating the printer. The front panel
controls are described in the following sections.
Power Button
Use the POWER button to power off and power on the printer. All lights show steady amber while
the printer powers on.
To power off the printer, press the button for 1 to 2 seconds until the printer begins to shut down.
To power off the printer while it is processing cards, press the button for 2 seconds or more. Card
jobs in the printer are not completed.
Down Arrow, Up Arrow, and Enter Key
Use the arrow keys to move through the printer menu system, and the ENTER key to make a
selection.
Press the up or down arrow key while the LCD panel displays Ready to display additional
information about the printer on line 2, including the firmware version, printer model, serial
number, network IP address or USB IP address, and ribbon part number. If you don’t press a key
for 30 seconds, the LCD panel returns to the default Ready message.
Status Lights
Ribbon
Cards
User Light &
User Button
Up
Arrow
Enter
Down
Arrow
Power
Button
LCD Panel
To Next Page
Loading...
Need help?
General
