CR500 Instant Issuance System Installation and Administrator’s Guide 1
Chapter 1: Introduction
This chapter provides information about this Installation and
Administrator’s Guide, and an introduction to the CR500 card printer.
About This Manual
This manual provides detailed instructions for installing the CR500 card printer and for
performing setup and administration tasks for the card printer. The tasks described in this manual
are not normally performed by the personnel who print cards.
Chapter 1: "Introduction” provides basic information about this manual and the CR500 card
printer.
Chapter 2: "Plan the Installation” provides instructions for unpacking the printer and selecting a
proper installation location.
Chapter 3: "Install the Printer” provides instructions for installing the hardware components,
cables, and power cords of the printer, and for configuring and verifying the network connection
to the printer.
Chapter 4: "Using Printer Manager” provides instructions for using the Printer Manager web
interface to perform management tasks required to configure and operate the card printer.
Chapter 5: "Supplies and Parts” describes the supplies and replacement parts available for the
CR500 printer.
Appendix A: "Print Unit Front Panel Menu and Messages” describes the print unit front panel
menu options.
Appendix B: "Printer Specifications” provides information about operating specifications and the
storage environment for the printer.
To Next Page
Loading...
Need help?
General
