DataCard CR500 Installation And Administrator's Guide

12 Plan the Installation
Printer Dimensions
The external printer dimensions are shown in the following illustrations.
Work Surface
The printer requires a sturdy work surface at least 45 inches (1.143 m) wide and 19 inches
(483 mm) deep.
If you plan to use the bolt-down feature, you must be able to drill a hole through the work
surface and you must have access to the underside of the work surface. (Refer to “Use the Bolt-
Down Feature” on page 16.)
21-3/8 in.
(54.3 cm)

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English