EasyManuals Logo
Home>DataCard>Printer>CR500

DataCard CR500 Installation And Administrator's Guide

DataCard CR500
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
CR500 Instant Issuance System Installation and Administrator’s Guide 41
Verify Network Communication
Access Printer Manager to verify that your workstation and the printer can communicate over the
network. To further verify that the printer works as expected, print a test card. You also can use
Printer Manager to perform other printer setup tasks, as necessary.
Access Printer Manager
Printer Manager is a web interface that displays information about the printer and provides setup
and troubleshooting tools. Printer Manager is available through a web browser. Use a current
browser, such as Internet Explorer, Firefox, or Chrome.
1. Use your network-connected PC to start Print Manager and log in.
Refer to Start Printer Manager on page48 for information about starting and logging in to
Printer Manager.
2. The Printer Manager Welcome page displays, indicating that your printer and PC are
communicating successfully.
Refer to Chapter 4: "Using Printer Manager for complete information about using Printer
Manager.
3. Continue with “Print a Test Card” on page 42.
During normal operation, site personnel should not use Printer Manager unless asked
to do so.

Table of Contents

Other manuals for DataCard CR500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard CR500 and is the answer not in the manual?

DataCard CR500 Specifications

General IconGeneral
BrandDataCard
ModelCR500
CategoryPrinter
LanguageEnglish

Related product manuals