DataCard CR500 Installation And Administrator's Guide

CR500 Instant Issuance System Installation and Administrator’s Guide 59
Behavior
Use the Printer Setting menu Behavior options to control the printer operation.
Option Description
ActivityLogExternal Enable or disable writing the activity log to an external syslog server.
Default: Enabled
ActivityLogInternal Enable or disable the internal activity log.
Default: Enabled
ContactAutoDetect This setting supports legacy smart card clients. It overrides the
smart card protocol sent by the client to the printer and uses
SCARD_PROTOCOL_T0_OR_T1.
Default: Disabled
ContactlessATRMode Select the default ATR mode for the DUALi contactless smart card
reader. The possible values are:
 Vendor: Uses the ATR mode specified by the vendor. The
generated ATR may not be compatible with all smart card
applications or card types.
 PCSC: Uses the PC/SC protocol to generate the ATR.
 CCID: Uses the CCID protocol to generate the ATR.
 Legacy: Uses the ATR mode currently in use by the reader.
 AppSpecifies: Allows the smart card application to control the
ATR mode.
Default: Legacy
Note: A smart card application may specify to receive the ATR in a
different format regardless of this setting. However, when the printer
restarts, the smart card reader returns to the setting specified here.
Consider whether you want to specify the format on a job-by-job
basis or modify the Printer Manager setting to use the desired ATR
format.
DPCL Enable or disable DPCL command access to the printer through the
unsecured port.
Default: Enabled
DPCL2 Enable or disable DPCL2 command access to the printer through the
unsecured port.
Default: Enabled

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English