DataCard CR500 Installation And Administrator's Guide

10 Plan the Installation
Site Requirements
Select a suitable location for the printer using the following guidelines.
Site Guidelines
The performance of the CR500 printer is strongly influenced by the installation location. Install
the unit in a location that meets the following criteria:
 Place the printer in a location that meets or exceeds ISO 14611-1 Class 8 cleanliness
standards. Using the printer in dusty locations may cause print blurring and printhead
malfunctions.
 Place the printer in a location that provides enough space to open the printer access doors.
Refer to “Printer Dimensions” on page 12.
 Place the printer in a location that has access to two AC outlets and a network port.
 Avoid locations susceptible to strong vibration or shock.
 Avoid locations exposed to direct sunlight.
 Avoid locations exposed to direct fluorescent lighting.
 Avoid locations where there is a possibility of metal objects or other foreign material
entering the printer.
 Avoid areas near walls with little ventilation. Refer to “Ventilation Clearance” on page 11.
 Avoid unstable locations and angled surfaces. Keep the printer off the floor.
 Avoid locations prone to static electricity, such as a carpeted room.
 Avoid areas near air conditioners, humidifiers, or heat sources that may cause condensation
inside the printer.
Operating Environment
Install the printer in an environment with the following recommended temperature and humidity
range:
 Temperature: 63°–83°F (17°–28°C)
 Humidity: 35%–70%, non-condensing
Caution: Using the printer in an environment with temperatures that are cooler
than the recommended range can cause retransfer errors. Using the printer in an
environment with temperatures that are warmer than the recommended range can
cause errors such as card warping and wrinkling of the film.

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English