EX3000 iDRAC cabling
Provides wiring diagrams for the iDRAC cables that connect the iDRAC port on the node to the Fox back-end switch for the
EX3000S system (single node chassis configuration) and the EX3000D system (dual node chassis configuration).
The EX3000S node iDRAC port to the Fox switch (BE1) port connections are listed in the following table.
Table 53. EX3000S node iDRAC port to BE1 port mapping
Node 1 iDRAC port BE1 Port 17
Node 2 iDRAC port BE1 Port 18
Node 3 iDRAC port BE1 Port 19
Node 4 iDRAC port BE1 Port 20
Node 5 iDRAC port BE1 Port 21
Node 6 iDRAC port BE1 Port 22
Node 7 iDRAC port BE1 Port 23
Node 8 iDRAC port BE1 Port 24
144 EX3000 Platform
To Next Page
Loading...
Need help?
General
