EX500 server
Learn about the EX500 servers standard features.
Table 30. Standard features of EX500 servers
Features 8 TB 12 TB 16 TB
HDDs in front
slots
8TB 7.2k RPM 512e SATA HDD 12TB 7.2k RPM 512e
SATA HDD
16 TB 7.2k RPM 512e
SATA HDD
SSD in rear slots Optional 960GB SATA MU SSD read cache.
● This feature is optional and available only with 3.5 and above. For more information, see ECS Appliance
SSD Read Cache Deployment guide.
Chassis
● EX500 24 x 3.5" 2 CPU chassis
● One-node server (2U) with two CPUs per node
● Maximum chassis weight is 43.2 kg (95.24 lb)
Riser
Configuration
● Each EX500 server supports up to eight PCI express (PCIe) Gen3 expansion cards that can be installed
on the system board using three expansion card risers.
● Config 1 (1B + 2B)
● Four x8 slots and rear storage
Processors 2x Xeon Silver 10 core/20 thread 85W
Memory 8 x 8GB RDIMM, 2666MT/s, Single Rank, x8 Data Width
Disk Controller HBA330 mini (IOC, JBOD)
PCIe Slot 1 Broadcom 57414 2x25GbE, QSFP28
PCIe Slot 2 BOSS controller card + with 1 M.2 stick 480 GB, LP
PCIe Slot 3 Broadcom 57414 2x25GbE, QSFP28
Management iDRAC9 Enterprise
Power 2 x 1100W Platinum
68 EX500 Platform
To Next Page
Loading...
Need help?
General
