4 Product overview
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
14
4.4.2 AC/DC disconnection switch
The inverter is disconnected from the grid (AC) and the solar
modules (DC) when the AC/DC Disconnection switch is in posi-
tion OFF.
The inverter is connected to the grid (AC) and the solar modules
(DC) when the AC/DC Disconnection switch is in position ON.
4.4.3 AC connector (AC output)
The AC connector is used for connecting the inverter to the grid.
Usage of the AC connection:
● Feeding AC current into the grid.
● Powering up the display when no DC voltage is available via
the DC connectors (DC inputs).
The inverter can be connected to:
● 5-wire grid systems 3P4W (L1, L2, L3, N, PE)
● 4-wire grid systems 3P3W (L1, L2, L3, PE).
AC plug type:
China Aviation Optical-Electrical Technology Co. PVE5T50KP73
The AC plug is delivered with the inverter.
To Next Page
Loading...
Need help?
General
