5
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
1 About this manual
1. About this manual
1.1 Purpose of this manual
This manual is part of the inverter and will help you become
familiar with the inverter.
Always follow the safety instructions given in this manual. You
can help keep the product durable and reliable during its use by
handling it carefully.
Read the manual carefully and thoroughly and follow the instruc-
tions contained therein. This manual contains important infor-
mation on the installation, commissioning and operation of the
inverter.
Always follow the general safety instructions (see “2 General
safety instructions”, p. 7).
Store the manual in a safe place near the inverter, so that
installer and operator have easy access to this manual.
The inverter can be safely and normally operated if installed and
used in accordance with this manual. Delta Energy Systems is
not responsible for damage incurred by failure to comply with the
installation and operating instructions in this manual.
1.2 Target audience of this manual
This manual is aimed at qualied electricians who have received
a sufcient training to apply safe methods of work to install a
micro-generator in compliance with the requirements of the
applying standard.
Only chapter “9 Measurements and statistics”, p. 101 is relevant
to the operator. All other activities may only be performed by
qualied electricians.
1.3 Warnings and symbols
Where hazards may arise when working with the inverter, the
following hazard levels and symbols are used to indicate these
hazards:
DANGER
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physi-
cal injury.
A note provides general information on using the inverter.
A note does not indicate hazardous situations.
Where required, further, supplementary warning symbols are
used. Type and source of the hazard is explained in the safety
instructions or warnings.
This symbol is a warning of a risk of electric
shock due to high voltage.
This symbol is a warning of a hot surface.
This symbol is a warning of general haz-
ards.