Delta RPI M6A User Manual

71
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
8 Settings
8.7 Insulation mode and insulation resistance
Description
With this function you can set up the mode of insulation and the insulation resistance.
Accessing the menu
Main menu > Install Settings > Insulation
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. When the default information is displayed, press any button to open the main menu. Oth-
erwise, repeatedly press the button
ESC
until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the buttons and to select Install Settings.
To conrm your selection, press the button
ENT
.
Password: * * * *
energy production
Adj. would effect
Warning:
3. The menu is protected by password 5555. Use the buttons and to set each digit.
To conrm a digit, press the button
ENT
.
Grid Settings
Country
Insulation
Inverter ID: 001
4. Use the buttons and to select Insulation.
To conrm your selection, press the button
ENT
.
Resistance: 1200 kΩ
Mode: ON
5. Use the buttons and to select Mode. The currently set mode of insulation is dis-
played behind the menu entry.
To conrm your selection, press the button
ENT
.
Plus grounded
Minus grounded
OFF
ON
6. Use the buttons and to select a type of insulation.
To conrm your selection, press the button
ENT
.
Resistance: 1100 kΩ
Mode: ON
7. Use the buttons and to select Resistance. The currently set value for the insu-
lation resistance is displayed behind the menu entry.
To conrm your selection, press the button
ENT
.
Do not change this setting without prior
consultation with Delta Solar Support.

Delta RPI M6A Specifications

General

Brand	Delta
Model	RPI M6A
Category	Inverter
Language	English