3 Intended use
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
8
3. Intended use
The inverter may only be used as intended.
Proper use of the inverter meets the following criteria:
● Use in stationary PV systems connected to the local power
grid for converting the direct current in the PV system to
alternating current and feeding it into the grid.
● Use within the specied power range (see “13 Technical
data”, p. 113) and under the specied ambient conditions
(see “5 Planning the installation”, p. 19).
Any of the following uses of the inverter is considered improper:
● Isolated operation. The inverter has anti-islanding and other
monitoring features.
● Use in mobile PV systems.
To Next Page
Loading...
Need help?
General
