17
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
4 Product overview
4.6 Information on the type label
Fig. 4.4: Type label M6A Fig. 4.5: Type label M8A Fig. 4.6: Type label M10A
Symbols on the type label
Symbol Description
60 seconds
Risk of death by electrocution
Potentially fatal voltage is present when the solar inverter is in operation that remains for 60
seconds after being disconnected from power.
Never open the solar inverter. The solar inverter contains no components that must be main-
tained or repaired by the operator or installer. Opening the cover will void the warranty.
Read the manual delivered with the inverter before working with the solar inverter and follow
the instructions contained in the manual.
Risk of injury from hot surfaces.
When in operation, the housing of the solar inverter can become very hot.
The housing of the inverter must be grounded if this is required by local regulations.
Regulatory Compliance Mark (RCM mark): The inverter is compliant with the Australian Electri-
cal Safety and EMC standards. Applies only to Australia and New Zealand.
To Next Page
Loading...
Need help?
General
