Denon AVR-4810 User Manual

0
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsSettings
ENGLISH
GUI Menu Operation
1
Press [SOURCE SELECT].
Display the “Source Select” menu.
SOURCE SELECT
Source
DVD
Recent
Video
Player
Network
Tuner
Enter
Move
q Input Source : The name of the highlighted input source is
displayed.
w Recently used sources : The recently used input sources (up to
5) are displayed.
The currently selected input source
is highlighted.
“ ” is displayed when using
a Control dock for iPod.
Selecting the Input Source
There are three ways to select the input source, as described below.
q Selecting the input source using the “Source Select” menu (GUI
menu)
w Selecting the input source using the [INPUT SOURCE SELECT]
(Main remote control unit)
e Selecting the input source using the <SOURCE SELECT> (Main
unit)
q Using the “Source Select” Menu
Switch the main remote control unit to the “MAIN” or “MACRO”
mode when performing this operation (vpage 99 “Operating the
Main Remote Control Unit”).
If the main remote control unit is in “ZONE2”, “ZONE3” or “ZONE4”
mode, the “Source Select” menu will not be displayed when [SOURCE
SELECT] is pressed.
q
w
e
Use the device selection buttons on the main remote control unit to
set the device to be operated beforehand.
When using with an iPod connected directly to the AVR-4810’s USB
port, select “USB/iPod” for the input source.
Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage 52).
To turn off the source selection menu without selecting an input
source, press [SOURCE SELECT] again.
•
•
•
•
w Operating on the Main Remote Control Unit
Press [INPUT SOURCE SELECT].
The desired input source can be selected directly.
b To operate the AVR-4810 using the main remote control unit,
set the remote control unit to the “MAIN” mode (vpage 99
“Operating the Connected Devices by Remote Control Unit”).
b Pressing the VCR/DVR button and the CD/PHONO button on the
main remote control unit will switch between the following.
VCR/DVR :
VCR DVR
CD/PHONO :
CD PHONO
Turn <SOURCE SELECT>.
b If “ZONE2/3/4 Rec Select”, “Video Select” or “Tuning Preset”
mode is selected for the input source, press <SOURCE> before
turning the <SOURCE SELECT>.
e Operating on the Main Unit
e Icons for the input sources in the different categories are
displayed.
Video :
Player :
Network :
Tuner :
(SAT/CBL), (TV), (VCR), (DVR),
(V.AUX)
(HDP), (DVD), (CD), (PHONO)
(Favorites), (Internet Radio),
(Media Server), (USB/iPod), (Napster)
(TUNER)
2
Use uio p to select the input source icon, then
press ENTER.
The input source is set and the source selection menu is turned
off.
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
ENTER
uio p
[INPUT
SOURCE
SELECT]
VCR/DVR
CD/PHONO
[SOURCE
SELECT]
ENTER
uio p<SOURCE>
<SOURCE SELECT>

Denon AVR-4810 Specifications

General

Impedance	8 Ω
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.05 %
Equalizer	Yes
Product color	Black
S-Video inputs quantity	7
Component video (YPbPr/YCbCr) in	3
HDMI ports quantity	6
Connectivity technology	Wired & Wireless
Headphone connectivity	3.5 mm
Digital audio optical out	1

Weight and Dimensions

Weight	19100 g