Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlayback
ENGLISH
Input signal
The indication contents of
the display
DOLBY DIGITAL
(other than 2ch) /
DOLBY DIGITAL EX
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL+PLgx CINEMA
DOLBY DIGITAL+PLgx MUSIC
DOLBY DIGITAL+PLgz
DOLBY DIGITAL Plus
DOLBY DIGITAL+
DOLBY DIGITAL
+
+EX
DOLBY DIGITAL
+
+ PLgx CINEMA
DOLBY DIGITAL
+
+ PLgx MUSIC
DOLBY DIGITAL
+
+ PLgz
DOLBY TrueHD
DOLBY TrueHD
DOLBY TrueHD+EX
DOLBY TrueHD+PLgx CINEMA
DOLBY TrueHD+PLgx MUSIC
DOLBY TrueHD+PLgz
DTS (5.1ch) /
DTS-ES Discrete 6.1 /
DTS-ES Matrix 6.1 /
DTS 96/24
DTS SURROUND
DTS+PLgx CINEMA
DTS+PLgx MUSIC
DTS+PLgz
DTS+NEO:6
DTS ES MTRX6.1 (z1)
DTS ES DSCRT6.1 (z2)
DTS 96/24 (z3)
DTS-HD
DTS-HD HI RES
DTS-HD MSTR
DTS-HD+NEO:6
DTS-HD+PLgx CINEMA
DTS-HD+PLgx MUSIC
DTS-HD+PLgz
DTS EXPRESS
PCM (multi ch) /
DSD (multi ch)
MULTI CH IN
MULTI IN+Dolby EX
MULTI IN+PLgx CINEMA
MULTI IN+PLgx MUSIC
MULTI IN+PLgz
MULTI CH IN 7.1
z1 : This is displayed when the input signal is “DTS-ES Matrix 6.1”
and the AVR-4810’s “AFDM” (vpage 82) setting is set to
“ON”
z2 : This is displayed when the input signal is “DTS-ES Discrete
6.1”.
z3 : This is displayed when the input signal is “DTS 96/24”.
For details, see page 116.
Displaying the Currently Playing Surround Mode
Surround Playback of Multi-channel Sources
(Dolby Digital, DTS, etc.)
In the case of standard playback of multi channel sources, the AVR-
4810 recognizes the format of the multi-channel audio input signal
and automatically operates the appropriate decoder for surround
sound.
n
Selecting the Surround Mode (Surround Mode)
The desired mode according to the program source and viewing situation
can be selected from among 10 DENON original surround modes.
1
Playing the source (vpage 64).
2
Select the surround mode by pressing DSP
SIMULATION.
MULTI CH STEREO
WIDE SCREEN
SUPER STADIUM
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
MONO MOVIE
VIDEO GAME
MATRIX
VIRTUAL
: This mode is for enjoying stereo sound from all
speakers.
: This mode is for enjoying the atmosphere of
viewing a movie on a large screen.
: This mode is suited for viewing sports programs.
: This mode is for enjoying the atmosphere of a live
concert in an arena.
: This mode is for enjoying the atmosphere of a live
concert in a jazz club.
: This mode is for appreciating classical concert
programs.
: This mode is for playing monaural movie sources
with surround sound.
: This mode is suited for achieving surround sound
with video games.
: This mode lets you add a sense of expansion to
stereo music sources.
: This mode is for enjoying surround effects using
only the front speakers or headphones.
z : When playing sources recorded in monaural in the “MONO
MOVIE” mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
z
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
e Direct Playback
In this mode the signals bypass the tone control circuitry for high
quality sound.
The sound is output to the same channels as the input signal.
Input signal
The indication contents of
the display
Analog signal /
PCM (2ch) /
Dolby Digital source /
DTS source /
Other 2-channel digital signals
DIRECT
DSD (2ch)
DSD DIRECT (
z
)
PCM (multi ch)
MULTI CH DIRECT
MULTI CH DIRECT + Dolby EX
MULTI CH DIRECT + PL
g
x CINEMA
MULTI CH DIRECT + PL
g
x MUSIC
MULTI CH DIRECT 7.1
DSD (multi ch)
DSD MULT DIRECT (
z
)
z : When DSD signals are converted to PCM signals as set by the
audio parameters and speaker settings, “DIRECT” or “MULTI CH
DIRECT” is displayed.
For details, see page 117.
1
Playing the source (vpage 64).
2
Press DIRECT/STEREO to select the “DIRECT”.
Displaying the Currently Playing Surround Mode
w Playing in a DENON Original
Surround Mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
