SIRIUS®
3.4.4 Analysis Mode
When you have just stopped a measurement, DEWESoft® will automatically open the last recorded data file in Review
mode, so that you can start the analysis right away:
Illustration 34: Analysis Mode: Review
The Review mode is much like the Measurement Mode. You will see the same measurement screens, the
channel-selector list and the properties of the currently selected instrument.
Differences are:
: you have additional tool-buttons
: there is a Signal overview window which will show you the whole data of one selected channel of the data file
Now you can use the cursors to analyse you data, zoom in and out of the data, click Offline math to add computations
based on your data, etc. You can also change the design of your measurement screens, print reports based on your data
and export the data to other file formats for further analysis.
Details about all these functions can be found in the Analyse chapter of the online-help (see 3.4.1 Online Help on page
17).
3.5 Advanced configuration
Note, that the DEWESoft® launcher has already done the
hardware setup for you – you can check this by going to Settings
– Hardware setup...:
Illustration 35: DEWESoft®: Open Hardware setup
Page 20/166 www.dewesoft.com Doc-Version: 1.4.2
To Next Page
Loading...
Need help?
General
