SIRIUS®
Counters (only on STGv2+ type) 1counter / 3 digital input, fully synchronised and alarm outpu
Counter Modes counting, waveform timing, encoder, tacho, gear-tooth sensor
Input Level Compatibility CMOS, LVTTL
Input Protection ±25Volt continuous
Alarm output Open collector, max. 100mA/30Volt
Sensor supply 5V/100mA; 12V/50mA
Additional Specifications
Misc. function Excitation level monitoring, self check function
Input Connector DSUB - 9, LEMO2B 7pin LEMO2B 10pin (others on request)
TEDS support Standard + MSI adapters
Table 21: SIRIUS-STG specifications II
5.13.2 STG+ (Counter) L1B7f
Illustration 129: CNT: counter pin-out
(LEMO 7pin)
Illustration 130: SIRIUS
i
8xSTG+
Connector type L1B7f
Connector on the module: EGG.1B.307.CLL
Mating cable connector: FGG.1B.307.CLAD52
Table 22: STG+ counter connector type
Digital Output Configuration
The “switch” of the open collector output is closed when active.
5.13.3 STG-L2B7f
Illustration 131: STG8 with 7-pin Lemo connectors
Page 88/166 www.dewesoft.com Doc-Version: 1.4.2
To Next Page
Loading...
Need help?
General
