Dini Argeo 3590ET User Manual

3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator E-AF09_02_16.03_EN_U
62
13.4.2 ERRORS ON THE AUTOMATIC AXLES WEIGHT ACQUISITION
13.4.2.1 ERROR ON THE DYNAMIC AXLES WEIGHT ACQUISITION
Error messages that can be displayed on the instrument, if there is an axles error (if the step <<ERR.EN>> = ENABLE):
3590E Visualizations
If the vehicle has passed over the maximum speed allowed
setted in <<SPEED>> step.
If the vehicle has passed under the minimum speed allowed
(< 1 km/h).
If the vehicle stopped on the platform.
If the weight has passed the capacity of the scale.
If the maximum number of axles is reached.
The instrument is unable to compute the axle weight

AXLE ACQUISITION
ERROR

AXLE ACQUISITION
ERROR

AXLE ACQUISITION
ERROR

AXLE ACQUISITION
ERROR

AXLE ACQUISITION
ERROR

AXLE ACQUISITION
ERROR

Dini Argeo 3590ET Specifications

General

Brand	Dini Argeo
Model	3590ET
Category	Accessories
Language	English

Summary

1. Introduction to the Weight Indicator

2. Main Technical Specifications Overview

Details power supply, operating temperature, converter, speed, signal range, and display characteristics.

3. Installation Procedures

3.1 Power Supply and Connections

Details power options (12Vdc, 24Vdc, battery) and connection safety regulations.

3.2 Instrument Start-Up

4. Front Panel Key Functions

4.1 Key Functionality Overview

Describes the specific actions of keys like C/DEL, TARE/ZERO, Fn/ENTER, and 2nd F.

4.2 "2ndF" Key Second Functions

4.3 Entering Alphanumeric Text

5. Display and Status Indicators

5.2 Status Indicator Meanings

Details the meaning of LED indicators and symbols on the LCD display.

5.4 Displayed Data Formats

5.5 Instrument Messages and Errors

5.5.1 Start-Up and Menu Messages

5.5.2 Weighing Phase Messages

6. Scale Zeroing Procedure

7. Tare Function Management

7.1 Manual Preset Tare Entry

Details methods for entering a tare value to subtract from accumulated weight.

7.3 Tare Cancellation

7.4 Tare Locking and Unlocking

11. Database Management

11.1 Customer Database Operations

Covers entry, modification, deletion, printing, selection, and research of customer data.

11.2 Material Database Operations

Covers entry, modification, deletion, printing, selection, and research of material data.

11.3 Vehicle Database Operations

12. Database Access Password Protection

13. Weighing Procedures

13.1 System Overview

Provides a general overview of the weighing system and its management capabilities.

13.2 Simple Axle Weighing Modes

Explains manual, automatic static, and automatic dynamic axle weighing without I/O.

13.3 Input-Output Axle Weighing Modes

Describes manual, auto static, and auto dynamic axle weighing with input/output.

13.4 Automatic Axle Weighing Cycle Functions

Covers functions for managing automatic axle weighing cycles like cancelling and error handling.

13.5 Axle Totalization Configuration

13.6 Additional Tare Functionality

13.8 Weight Thresholds for Weighing

13.9 Accumulated Totals Visualization and Clearing

14. Printout Functions

Simple and Axle Weighing Reports

Input/Output Weighing Reports

Reports with Preset Tare

Details reports for I/O weighing with preset tare, including weight difference.

14.1 Print Format Linking

Linking Formats to Print Functions

How to link print formats to specific print functions.

Quick Format Linking Methods

Provides shortcuts for linking formats to print functions.

14.4 Default Printing Formats

15. Additional Instrument Functions

15.1 Diagnostic Peripherals

15.2 COM Data Diagnostics

15.3 Built-in Calculator

15.5 Setting Date and Time

15.6 Set-Point Function Configuration

Normal Functioning Mode

Setpoints Based on Gross Weight

Configures setpoints for gross weight activation/deactivation of outputs.

Setpoints Based on Net Weight

Configures setpoints for net weight activation/deactivation of outputs.

Setpoints Based on Totals

Setpoints for Negative Net Weight

Output Function Modes (without hysteresis, operation made, etc.)

Control Light Functionality

Uses outputs as control lights to guide driver for axle positioning.

Setpoint on Axle Total

Enables relay on sum of acquired axles, based on enabling setpoint.

Exclusive Functioning Mode for Outputs

Configures exclusive use of outputs, creating activation ranges.