Basic Operations
35
a
Press the button to display
menus in the order Settings -
Keystone.
Remote control Control panel
b
Use the button to select
Quick Corner, and then press the
button. Press the button again if
necessary.
The area selection screen is displayed.
c
Use the buttons to
select the corner of the image you
want to adjust. Then press the
button.
c
To reset the Quick Corner
corrections, hold down the
button for about two
seconds while the area selection
screen is displayed, and then
select Yes.
d
Press the buttons
to adjust the image shape as
necessary. Press the
button to
return to the area selection screen.
c
If you see this screen, you cannot
adjust the shape any further in
the direction indicated by the
gray triangle.
e
Repeat steps 3 and 4 as needed to
adjust any remaining corners.
f
When you are finished, press the
button.
c
After executing Quick Corner,
the Keystone setting is now set
to Quick Corner in the
projector's Settings menu.
When you press one of the
buttons on the control
panel, the area selection screen
is displayed.
Adjusting the Volume
You can control the volume using the buttons on the remote control, or the buttons on
the control panel (EH-TW6700W/EH-TW6700 only).
Downloaded from www.vandenborre.be