Epson EH-TW6700W User Manual

Adjusting the Image
47
Viewing the Image at the Saved Image Quality
(Memory Function)
Saving a Memory
By using the memory function, you can register settings for Image from the Configuration menu, and then
load them when necessary.
a
Make the settings or adjustments you
want to register.
b
Press the button.
c
Use the buttons to
select Save Memory, and then press
the
button to confirm the
selection.
d
Use the buttons to
select the memory name to be saved,
and then press the
button to
confirm the selection.
The current projector settings are saved to
the memory.
If the mark on the left of the memory name
is turned aqua, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select Yes, the
previous content is erased and the current
settings are saved.
Loading, Deleting, and Renaming a Memory
You can load, delete, and rename registered memories.
Press the
button, and then select the target function on the screen displayed.
Function Explanation
Load Memory
Loads the saved memory. When you select a memory and press the
button, the settings applied to the current image are replaced with the
settings from the memory.
Erase Memory
Erases the registered memory. When you select a memory name and press
the
button, a message is displayed. Select Yes, and then press the
button to erase the selected memory.
Downloaded from www.vandenborre.be

Epson EH-TW6700W Specifications

General

Brand	Epson
Model	EH-TW6700W
Category	Projector
Language	English