Adjusting the Image
40
d
Press the button to exit the
menu.
Adjusting Image Resolution (Image Enhancement)
You can adjust the resolution of the image using the Image Enhancement function.
The following content can be adjusted.
Image Preset Mode
Select the settings prepared in advance as the settings for Noise Re‐
duction, MPEG Noise Reduction, Super-resolution, and Detail En‐
hancement.
Noise Reduction
(This can only be set when Image Processing is set to Fine.)
Smoothes out rough images.
MPEG Noise Reduction
(This can only be set when Image Processing is set to Fine.)
You can reduce dot and block noise that occurs in outlines when pro-
jecting MPEG movies.
Super-resolution
Fine Line Adjust: Enhances the contrast and the outlines of complicated
images.
Soft Focus Detail: Enhances the contrast and the outlines for smooth
backgrounds.
Detail Enhancement
Enhances the contrast in an image to create a more emphatic texture
and material feel.
Depending on the image, a highlight may be noticeable at the border
between colors. If this bothers you, set a smaller value.
For the EH-TW6800, you can set Strength and Range.
Strength: The larger the value, the stronger the contrast.
Range: The larger the value, the wider the range of detail enhancement
becomes.
a
Press the button.
c
You can make settings from the
Configuration menu.
s
Image -
Image Enhancement p.86
b
Use the buttons to
select the item you want to adjust, and
then press the
button to confirm
the selection.
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
