Epson EH-TW6700W User Manual

Useful Functions
63
Setting the WirelessHD Transmitter
a
Set up the WirelessHD Transmitter
connected to the projector so that
they are facing each other.
s p.56
c
•
The antennas are built-into the
front of the projector and the
WirelessHD Transmitter. Make
sure the antennas face each other
(face the front) when setting up
the devices.
Also, do not place any object over
the front side of the projector and
WirelessHD Transmitter.
•
Place the WirelessHD
Transmitter on a level surface
facing towards the projector.
b
Connect the WirelessHD Transmitter
to an electrical outlet using the
supplied AC adapter.
c
Using an HDMI cable, connect the AV
device you want to use to the Input
port on the WirelessHD Transmitter.
You can connect up to four multi-media
players.
c
•
You can connect another monitor device, such as a television, to the HDMI Out port on the WirelessHD
Transmitter. You can switch between output images using the remote control.
s p.68
•
The HDMI4 port of the WirelessHD Transmitter supports the MHL input signal. You can play content
from MHL compatible smart devices or tablets connected with an MHL cable.
•
If the following message is displayed when you connect an MHL device, the device has been connected
to a port other than the HDMI4 port, or the connected device is not compatible with MHL.
"No Signal"
•
You can use the HDMI link function even when using the WirelessHD Transmitter. s p.70
Projecting Images
a
Start playback on the AV device, and then turn on the projector and the WirelessHD
Transmitter.
The On/Standby indicator on the WirelessHD Transmitter turns on.
Downloaded from www.vandenborre.be

Epson EH-TW6700W Specifications

General

Brand	Epson
Model	EH-TW6700W
Category	Projector
Language	English